Features

• Extended frequency range, high fidelity sound
• Light weight (<2.5 lbs.), small size (2.1x7.2x7.4 inches)
• Two channels each with tone controls and filter
• Tip Ring Sleeve ¼ inch input per channel, XLR adaptor included
• Internal circuit automatically senses mic or pickup input
• Channel and Master level controls
• Four band EQ per channel
• Sweepable low cut filter per channel
• Direct out with selectable 10 dB pad, pre/post switch and ground lift
• Mute switch
• Selectable internal jumper options for gain and limiter
• High fidelity, low noise operation: 110 dB SNR at direct out
• Automatic voltage switching for universal AC mains operation
• 650 Watt output at 4 ohms (music power)
• Dual speaker outputs with speakon connectors
• ¼-20 mounting nut on chassis bottom for mounting on mic stand or combo amp bracket
• Comes with padded case

• Technical Specs

  System
  Frequency Response	30 Hz-20 kHz (±0.5 dB)
  Signal to Noise Ratio	>110 dB at direct out
  AC Power	100V to 240V, 50/60 Hz, automatically switched
  Size	2.1" x 7.2" x 7.4"
  Weight	2 lbs. 10 oz.
  Preamp
  Inputs	¼ inch Tip Ring Sleeve with automatic sensing for mic or pickup input
  Mic input	600 ohm balanced, switchable 48 V phantom power, switchable 10 dB gain
  Instrument input	1 Mohm
  Direct Out	+4 dB, balanced, XLR connector, ground lift, pre/post EQ selector, 10 dB pad
  Low Control	Shelving type, ±12 dB at 30 Hz
  Low Mid Control	±12 dB at 250 Hz
  High Mid Control	±12 dB at 1200 Hz
  High Control	Shelving type, ±15 dB at 10 kHz
  Power Amp
  Topology	Class D (PWM)
  Switching Frequency	500 kHz
  Output Power 8 Ohm	300W rms continuous, 350W rms music (40% duty cycle), 500W peak transient
  Output Power 4 Ohm	500W rms continuous, 650W rms music (40% duty cycle), 1000W peak transient
  External Speaker Out	Speakon type (pole 1), 2ohm min load
  Supplied Accessories	Gig bag, XLR to ¼ inch input adapter

  Control Panel

  

  Rear Panel